The Assessment of the Process of Drawing a Cylindrical Workpiece Without Pressing with Alternating Strain of the Workpiece Flange

EasyChair Preprint 5520

Abstract

The development of a method for drawing cylindrical parts without pressing the workpiece flange, which allows reducing the cost of production due to the use of dies without a fit ring and single-acting presses. The performed research revealed that this method results in obtaining cylindrical parts with drawing coefficients typical of drawing with pressing. In this case, the different thickness of the finished product is several times less compared with the same type of semi-finished products obtained by drawing with a fit ring. Steel, aluminum and copper workpieces were researched. More plastic materials revealed the best results. This method cannot be applied to materials with thickness less than 0.25 mm.

Keyphrases: one, three, two

@booklet{EasyChair:5520,
  author    = {Roman Arhat and Viktor Shchetynin and Ruslan Puzyr and Dmitry Savelov and Tetiana Haikova},
  title     = {The Assessment of the Process of Drawing a Cylindrical Workpiece Without Pressing with Alternating Strain of the Workpiece Flange},
  howpublished = {EasyChair Preprint 5520},
  year      = {EasyChair, 2021}}